Small Portable Argon Mix Air Bottle Large Argon CO2 Cylinder

Small Portable Argon Mix Air Bottle Large Argon CO2 Cylinder

  •  HS
  •  Fabriqué en Chine
  •  15 à 30 jours
  •  Production annuelle de plus de 800 000 pièces

Small portable hybrid argon gas cylinder Large CO2 argon gas cylinder
Le service, c'est une attitude, mais aussi un repos assuré.
Seule une garantie de service minutieuse permet d'obtenir une bonne qualité.
Summer to have shading facilities to prevent exposure to the sun, hot areas should avoid daytime transport.
In addition to the driver, escort personnel, is strictly prohibited from taking.
Passengers and crew are strictly prohibited from smoking or carrying fire.
No fireworks on board. When transporting flammable and toxic gas cylinders, fire extinguishing equipment or gas protection equipment should be equipped on the vehicle.
1, mixture cylinder parameters: 89mm-267mm outer diameter; 0.8 litre to 80 litre mixture cylinders; Argon co2 mixing gas cylinder working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material; Iso9809-3 production standard;
2. Height of mixed gas cylinder: 197mm-1520mm; Cylinder body weight: 1.60kg-72.4kg; Minimum design wall thickness of gas cylinders: 2.4mm-6.2mm; Cylinder mouth thread: PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage capacity of mixed cylinders is 0.12m3-12m3 (150L-12000L)
3、Alias: Mix gas cylinder, 150bar Argon cylinder, Argon C02 bottle, Air gas Argon cylinder, Argon Mix bottle
Shandong Hongsheng Pressure Vessel Co. est prêt à devenir votre partenaire à long terme et votre responsable de la sécurité des bouteilles, et à assurer conjointement la sécurité de vos bouteilles.

Catégorie :

Small portable hybrid argon gas cylinder Large CO2 argon gas cylinder

length of internal thread, L2 length of full form thread in the cylinder neck, measured along the cone axis

pitch P distance, measured parallel to the cone surface, between two homologous points of two parallel consecutive flanks of the same thread

1、Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research

2、Quantité minimale de commande : 100 seulement

3、Taper ratio of the difference of two diameters corresponding to planes normal to the axis of the reference cone, and the axial distance between the same planes

We are China’s gas cylinder production factory,

4、Bend test and flattening test of cylinders:

The bend test shall be carried out in accordance with ISO 7438 on two test pieces obtained by cutting either one or two rings of width 25 mm or 4 t, whichever is the greater, into equal parts. Each test piece shall be of sufficient length to permit the bend test to be carried out correctly. Only the edges of each strip may be machined.

5、The test piece shall not crack when bent inwards around the former until the inside surfaces are not further apart than the diameter of the former (see Figure 6).

6、Seamless steel cylinders, whose body material is specified, must be made of killed steel smelted in alkaline open hearth, electric hearth or oxygen blowing alkaline Bessemer.

7、(ISO9809-3 TUV 150BAR)Small portable hybrid argon gas cylinder Large CO2 argon gas cylinder

Type A l'extérieur

Diamètre

(mm)

 L'eau

Capacité

(L)

 Bouteille

Hauteur

(mm)

 Poids

（kg）

 Travailler

pression

（Bar）

 Mur de conception

l'épaisseur

（mm）

 Matériau

Notes
WMⅡ89-1L-150 89 1 240 1.83 150 2.4 37MN
WMⅡ89-1.4L-150 89 1.4 310 2.30 150 2.4
WMⅡ108-2.0L-150 108 2 310 3.62 150 2.9
WMⅡ108-2.5L-150 108 2.5 374 4.29 150 2.9
WMⅡ108-3.0L-150 108 3.0 440 4.96 150 2.9
WMⅡ108-5.0L-150 108 5.0 696 7.74 150 2.9
WMⅡ140-3.4L-150 140 3.4 324 5.3 150 3.8
WMⅡ140-4.0L-150 140 4.0 375 5.89 150 3.8
WMⅡ140-5.0L-150 140 5.0 447 6.96 150 3.8
WMⅡ140-6.3L-150 140 6.3 540 7.88 150 3.8
WMⅡ140-6.7-150 140 6.7 569 8.30 150 3.8
WMⅡ140-8.0L-150 140 8.0 665 9.68 150 3.8
WMⅡ140-9.0L-150 140 9.0 744 10.7 150 3.8
WMⅡ140-10.0L-150 140 10.0 818 11.9 150 3.8
WMⅡ159-8.0L-150 159 8.0 548 9.11 150 4.3
WMⅡ159-10.0L-150 159 10.0 660 10.9 150 4.3
WMⅡ159-12.0L-150 159 12.0 780 13.1 150 4.3
WMⅡ159-13.4L-150 159 13.4 861 15.4 150 4.3
WMⅡ159-15.0L-150 159 15.0 932 16.8 150 4.3
WMⅡ180-20.0L-150 180 20.0 1012 24.8 150 4.9
ISO219-40.0L-150 219 40.0 1300 48.0 150 5.7
ISO232-40.0L-150 232 40.0 1167 43.0 150 6.0
ISO232-46.7L-150 232 46.7 1345 48.9 150 6.0
ISO232-47.0L-150 232 47 1351 49.0 150 6.0
ISO232-50.0L-150 232 50.0 1450 57.7 150 6.0

Produits similaires