40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder – Image 2
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder – Image 3
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder – Image 4
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder – Image 5
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder – Image 6
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder – Image 7
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder – Image 8
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder – Image 9
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder – Image 10

40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder

  •  HS
  •  Fabriqué en Chine
  •  15 à 30 jours
  •  Production annuelle de plus de 800 000 pièces

40L 150bar CO2 bottle Argon Nitrogen Helium N2O Air cylinder
Alias:gas cylinders, 40L gas bottles, gas bottles, CO2 gas cylinders, 40L Argon gas cylinders;40 litre gas bottles; 40 litre gas cylinder; 40 litre gas tanks
In order to avoid cylinder explosion, gas combustion, poisoning and other accidents in use. All users of bottled gas shall, according to the nature of different gases and the relevant national standards and standards, formulate the management system for the use of bottled gas and the safe operation procedures;
40 litre argon gas bottle; 37 mn manganese steel; Gas cylinder production standard GB/T5099.3 or ISO9809-3; TUV; The outer diameter of oxygen tank is 219mm; Gas tank working pressure is 150bar; The hydrostatic test pressure of the gas tank is 250bar;
The use unit should be dedicated to the bottle. It is strictly forbidden for users to refit or change the color marks of gas cylinders or mix gas without authorization. If an accident is caused, the refit shall be held responsible;
The height of the 40-litre gas cylinder is 1300mm; 40 litre gas cylinder weight 46.4kg; The 40-litre cylinder has a maximum storage capacity of 6m3 (6000 litres); The minimum design wall thickness for 219-40 litre cylinders is 5.7mm; Cylinder mouth thread PZ27.8; 25E; 3/4-14 NGT, etc.;

Catégorie :

40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder

The length of the wedges shall be not less than the width of the flattened cylinder. The longitudinal axis of the cylinder shall be at an angle of approximately 90° to the knife edges.

1、Minimum de commande : 100 seulement

2、we are the manufacturer：Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research

3、Les produits peuvent être exportés vers les pays ou régions suivants : Chine, Asie du Sud-Est, Moyen-Orient, Asie, Afrique, Europe, Océanie, Amérique.

4、Flattening test of gas tanks:

The flattening test shall be performed on one cylinder selected from each batch after heat treatment.

The test cylinder shall be flattened between wedge-shaped knife edges with a 60° included angle, the edges being rounded to a nominal radius of 13 mm.

5、The test cylinder shall be flattened until the distance between the knife edges is in accordance .

The flattened cylinder shall remain visually uncracked.

6、Flattening test of gas cylinders:

The flattening test shall be performed on one cylinder selected from each batch after heat treatment.

The test cylinder shall be flattened between wedge-shaped knife edges with a 60° included angle, the edges being rounded to a nominal radius of 13 mm. The length of the wedges shall be not less than the width of the flattened cylinder. The longitudinal axis of the cylinder shall be at an angle of approximately 90° to the knife edges.

The test cylinder shall be flattened until the distance between the knife edges is in accordance

The flattened cylinder shall remain visually uncracked.

7、40 litre Gas Cylinder Product Parameters table (ISO9809-3 TUV 150BAR)

40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder

Type A l'extérieur

Diamètre

(mm)

 L'eau

Capacité

(L)

 Bouteille

Hauteur

(mm)

 Poids

（kg）

 Travailler

pression

（Bar）

 Mur de conception

l'épaisseur

（mm）

 Matériau

Notes
ISO219-40.0L-150 219 40.0 1300 46.4 150 5.7 37MN
ISO232-40.0L-150 232 40.0 1156 45.7 150 6.0 37MN

Produits similaires