3L ISO9809-1 TPED 200bar34CrMo4 Oxygen Tanks Gas Cylinders

3L ISO9809-1 TPED 200bar34CrMo4 Oxygen Tanks Gas Cylinders

Conseils pour une utilisation sûre des bouteilles de gaz :

If the paint on the outer wall of the cylinder falls off and the words are blurred, the paint color should be repainted according to the regulations, otherwise the filling unit will refuse to fill.

Gas cylinder wall cracks, leakage or obvious deformation, after strength check can not be used in accordance with the original design pressure, as well as burned gas cylinders, should be scrapped in principle, can not continue to use.

Shandong Hongsheng Pressure Vessel Co. est prêt à devenir votre partenaire à long terme et votre responsable de la sécurité des bouteilles, et à assurer conjointement la sécurité de vos bouteilles.

1、Minimum de commande : 100 seulement

2、Utilisation des cylindres : nos cylindres en acier sans soudure sont largement utilisés dans l'industrie, les appareils médicaux, la lutte contre les incendies et la recherche scientifique.

3、We are China’s gas cylinder production factory, product sales:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America

4、Cylinder packaging process

1）. Packaging is the last step in the whole gas cylinder production process. Assembly should be carried out according to the requirements of the production task list.  Mainly include: set net set, loading certificate, packing and play support and other work.

2）. Check the inner appearance of the cylinder before packaging, no impurities, pits, scratches and other defects.

3）. For the cylinder body without the valve, the matching tap should be used to detect whether the thread is qualified and whether the thread is complete, without broken teeth, flat teeth and missing teeth.

4）. Packed cylinders shall be stored in accordance with specifications and models, and batch quantity and configuration shall be indicated.

5、 Limitation on tensile strength

Where there is no risk of hydrogen embrittlement, the maximum value of the tensile strength is limited by the ability of the steel to meet the requirements of Clauses 9 and 10, but the maximum actual tensile strength, Rma, shall always be less than 1 100 MPa for chrome-molybdenum steels and in no case exceed 1 030 MPa for carbon manganese steels.

6、3L ISO9809-1 TPED 200bar34CrMo4 Oxygen Tanks Gas Cylinders