20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder
20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder – Image 2
20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder – Image 3
20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder – Image 4
20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder – Image 5
20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder – Image 6
20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder – Image 7
20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder – Image 8
20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder – Image 9
20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder – Image 10

20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder

  •  HS
  •  Fabriqué en Chine
  •  15 à 30 jours
  •  Production annuelle de plus de 800 000 pièces

20L 200bar iso9809-1 CO2 cylinder argon nitrogen helium N2O cylinder
Before using the gas cylinder, it is necessary to check whether the safety device of each gas cylinder is in good condition. If the pressure relief device, bottle cap and shockproof ring are missing, it is not allowed to enter the field.
20 litre cylinder; 34CrMo4 alloy steel; TPED 180mm cylinder diameter; ISO9809-1 standard; Working pressure 200bar; Hydraulic test pressure 300bar;
Gas cylinders should be checked before use. There is no serious corrosion, damage or deformation of cylinders and accessories, no cracks on the surface, and the scratch depth is not more than 3m.
Gas cylinder valve should be intact, no bending and falling off phenomenon; The thread has no axial damage or deformation affecting the sealing, otherwise it shall not enter the construction site.
20 l 200bar industrial oxygen cylinder height 1012mm; 20 litres of oxygen cylinder body weight 24.8KG; The 20 litre oxygen cylinder has a maximum storage capacity of 4m3 (4000 litres); Oxygen cylinder mouth thread PZ27.8; 25E; 3/4-14 NGT, etc.; The minimum design wall thickness of oxygen cylinder is 3.9mm;
If a gas cylinder with a base is encountered, the base should be in good condition, without deformation, opening welding, cylinder standing instability and other phenomena;
Alias: 20L 200bar gas cylinders; 20L 200bar gas tanks,20L Helium gas cylinders,TPED N2O gas cylinders,TPED N2O gas cylinders; 20litre 200bar gas cylinders; 20 litre 200bar gas bottles; 20 litre 200bar gas tanks;

Catégorie :

20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder

1、Minimum de commande : 100 seulement

2、Utilisation des cylindres : nos cylindres en acier sans soudure sont largement utilisés dans l'industrie, les appareils médicaux, la lutte contre les incendies et la recherche scientifique.

3、Les produits peuvent être exportés vers les pays ou régions suivants : Chine, Asie du Sud-Est, Moyen-Orient, Asie, Afrique, Europe, Océanie, Amérique.

4、Factory (nous sommes le fabricant)：Shandong Hongsheng Pressure Vessel Co. LTD

5、Volumetric expansion test of gas bottles:

La pression de l'eau dans la bouteille doit être augmentée à un taux contrôlé jusqu'à ce que la pression d'essai, ph, soit atteinte avec une tolérance de mesure de 0/+3 % ou +10 bar, la valeur la plus faible étant retenue.

The cylinder shall remain under pressure, ph, for at least 30 s and the total volumetric expansion measured. The pressure shall then be released and the volumetric expansion re-measured.

The cylinder shall be rejected if it shows a permanent expansion (i.e. volumetric expansion after the pressure has been released) in excess of 10 % of the total volumetric expansion measured at the test pressure, ph.

The total and permanent expansion readings shall be recorded, together with the corresponding serial number of each cylinder tested, so that the elastic expansion (i.e. total expansion less permanent expansion) under the test pressure can be established for each cylinder.

6、20 litre Gas Cylinder Product Parameters table (ISO9809-1  TPED 200BAR)

20L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder

Type A l'extérieur

Diamètre

(mm)

 L'eau

Capacité

(L)

 Bouteille

Hauteur

(mm)

 Poids

（kg）

 Travailler

pression

（Bar）

 Mur de conception

l'épaisseur

（mm）

 Matériau

Notes
WGⅡ180-20.0L-150 180 20.0 1012 24.8 200 3.9 34CrMo4

Produits similaires