70L ISO9809-1 10.5M3 150bar 37MN Bouteilles d'oxygène Bouteilles de gaz

  •  HS
  •  Fabriqué en Chine
  •  15 à 30 jours
  •  Production annuelle de plus de 800 000 pièces

150bar 37MN 70L ISO9809-1 10.5M3 Oxygen tanks gas cylinders
Informations sur le produit :
1、70 litres of; 37 mn; Iso9809-1 production standard; 267mm cylinder outer diameter; Working pressure 150bar; Hydrostatic test pressure 250bar;
2、The height of the cylinder body is 1520mm; The weight of the bottle is 72.4kg;
Maximum oxygen tank storage capacity is 10.5m3 (10,500 liters);
The minimum design wall thickness of the cylinder is 6.2mm;
Carbon dioxide cylinder mouth thread PZ27.8; 25E; PZ39; 3/4-14 NGT, etc.;
The product can be filled with oxygen, nitrogen, carbon dioxide, air and other gases
3、Alias: Cylinders 70L 150bar gas cylinders; Cylinders 70L 150bar Oxygen tanks, cylinders 10.5m3 gas cylinders, cylinders 70L Oxygen tanks; Fire tanks ,70liter Fire cylinders; 70L nitrogen fire cylinder, Refuge chamber gas cylinder

70L ISO9809-1 10.5M3 150bar 37MN Bouteilles d'oxygène Bouteilles de gaz

1、Minimum de commande : 100 seulement

2、Utilisation des cylindres : nos cylindres en acier sans soudure sont largement utilisés dans l'industrie, les appareils médicaux, la lutte contre les incendies et la recherche scientifique.

3、Nous sommes une usine de production de bouteilles de gaz en Chine. Nos produits sont vendus en Chine, en Asie du Sud-Est, au Moyen-Orient, en Asie, en Afrique, en Europe, en Océanie et en Amérique.

4、 The following tests shall be carried out on each batch of cylinders.

a) On one cylinder, one hydraulic burst test

b) On a further cylinder:

⎯ one tensile test in the longitudinal direction ;

⎯ either two bend tests  in a circumferential direction, one flattening test  or one ring flattening test ;

⎯ when the thickness of the cylinder permits the machining of a test piece at least 3 mm thick, three impact tests in the transverse or longitudinal direction as required ;

⎯ for cylinders made from continuously cast billet material, a base check in accordance with

5、Tensile test : A tensile test shall be carried out on material taken from the cylindrical part of the cylinder by adopting either of the following procedures.

It is recommended that machined round specimens not be used for wall thickness less than 3 mm.

Conseils pour une utilisation sûre des bouteilles de gaz :

Gas cylinders should be stored in a well-ventilated place, strictly prohibited in the vicinity of precision equipment, cables, refueling systems, inflammables, etc., or in a confined space, and should be prevented from sunlight exposure in summer. Cylinders must be fitted with two shock rings and cylinders caps.

There are wired and wireless communication modes in the chamber. Specially developed gas sensors are used to monitor the concentration of O2, CO2, CO, CH4 and other gases inside and outside the chamber, and the monitoring data are transmitted to the monitoring sub-station and ground dispatching room in the chamber.

Shandong Hongsheng Pressure Vessel Co. est prêt à devenir votre partenaire à long terme et votre responsable de la sécurité des bouteilles, et à assurer conjointement la sécurité de vos bouteilles.

6、70 litre Gas Cylinder Product Parameters table (ISO9809-3 150BAR)

70L ISO9809-1 10.5M3 150bar 37MN Bouteilles d'oxygène Bouteilles de gaz

Type A l'extérieur

Diamètre

(mm)

L'eau

Capacité

(L)

Bouteille

Hauteur

(mm)

Poids

(kg)

Travailler

pression

(Bar)

Mur de conception

l'épaisseur

(mm)

Matériau

Notes

ISO267-70.0L-150 267 70.0 1520 72.4 150 6.2 37MN