Rho British Certificate 5L 200bar 34CrMo4 Oxygen Tanks Gas Bottle Industrial Cylinders

200bar 34CrMo4 Gas Bottle Industrial Cylinders  Oxygen Tanks

Iso9809-1 Standard gas cylinder production material requirements:

1, no aging, non-boiling steel, must be dealuminized and silicon treatment;

2, national or international recognized steel, or technological progress produced by the new steel cylinder;

3, the material should have quality certificate;

4, if the need for reinspection, the deviation should meet the provisions of ISO2604-2;

See ISO9809-1 for chemical composition and deviation of steel

1 、 Mindste ordremængde: Kun 100 stk.

product sales: Middle East, China,Southeast Asia, Asia, Africa, Europe, Oceania, America

2、Use cylinders:Our seamless steel cylinders are widely used in  medical devices, industry, fire fighting and scientific research

3、MADE IN CHINA:We are China’s gas cylinder production factory,

Tips til sikker brug af gasflasker:

The valve of high-pressure gas cylinder should be opened slowly, especially the cylinder with combustible gas medium, to prevent combustion or explosion caused by high temperature or electrostatic action caused by high speed.

Do not use metal tools to knock on the bottle valve and body, in order to avoid sparks or damage the bottle valve.

Do not touch or operate the oxygen cylinder with grease gloves or tools.

Shandong Hongsheng Pressure Vessel Co, Ltd. er villig til at være din langsigtede partner og chef for cylindersikkerhed og i fællesskab eskortere din cylindersikkerhed.

4、Failure to meet test requirements In the event of failure to meet the test requirements, retesting or reheat treatment and retesting shall be carried out as follows to the satisfaction of the inspector.

a) If there is evidence of a fault in carrying out a test or an error of measurement, a further test shall be performed. If the result of this test is satisfactory, the first test shall be ignored.

b) If the test has been carried out in a satisfactory manner, the cause of test failure shall be identified.

5、Cylinder spraying process  ： The cylinder spraying adopts electrostatic spraying, which is a spraying method using high voltage electrostatic electric field to make the negatively charged coating particles move in the opposite direction of the electric field and adsorb the coating particles on the surface of the workpiece.  According to customer requirements in accordance with national and international standards and different filling media, combined with raul color card to spray different paint color for the cylinder.

6、(ISO9809-1 200BAR) Product parameters table

200bar 34CrMo4 Oxygen Tanks  Industrial Cylinders Gas Bottle