Rho 1266 GB Market ISO 150bar 37MN Oxygen Tanks CO2 Gas Bottle Medical Cylinders

ISO 150bar 37MN Oxygen Tanks Gas Bottle Medical Cylinders

Information om produktet:

1、89mm-267mm cylinder outer diameter; 0.8 litres to 80 litres; Iso9809-3 or GB/T5099.3 production standards; Working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material;

2、The cylinder body weight is 1.60kg-72.4kg; The minimum design wall thickness of gas cylinders is 2.4mm-6.2mm; Maximum gas storage is 0.12m3-12m3 (150L-12000L); Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; The height of the cylinder body is 197mm-1520mm;

3、Aliases: Iso9809-3 Oxygen cylinders; 37 mn Gas cylinders. Gas bottles; Medical Oxygen tanks. Medical Oxygen cylinders。

4、A cylinder shall be considered to be of a new design, compared with an existing approved design, when at least one of the following applies:

a) it is manufactured from a steel of different specified chemical composition range as defined ;

b) it is given a different heat treatment beyond the limits stipulated ;

c) the base profile has been changed, e.g. concave, convex, hemispherical or also if there is a change in base thickness/cylinder diameter ratio;

d) the overall length of the cylinder has been increased by more than 50 % (cylinders with a length/diameter ratio less than 3 shall not be used as reference cylinders for any new design with this ratio greater than 3);

Shandong Hongsheng Pressure Vessel Co, Ltd. er villig til at være din langsigtede partner og chef for cylindersikkerhed og i fællesskab eskortere din cylindersikkerhed.

1 、 Mindste ordremængde: Kun 100 stk.

2 、 Brug af cylindre: Vores sømløse stålcylindre bruges i vid udstrækning i industrien, medicinsk udstyr, brandbekæmpelse og videnskabelig forskning

3 、 Vi er Kinas gasflaskeproduktionsfabrik, produktsalg: Kina, Sydøstasien, Mellemøsten, Asien, Afrika, Europa, Oceanien, Amerika

4、We cut the steel seamless tube blank according to the material transfer number with marker pen or stone pen to write the middle part of the blank, clearly visible, strictly implement the material flow procedure, to ensure that each cylinder, from raw materials to finished products all layers of control;

5、ISO9809-3-2010 of document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For Specific European requirements, see normative Annex NA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

6、Product parameters table(ISO9809-3)