50L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
Generally -40-60℃. Therefore, for the gas cylinders used in cold areas, it is best to choose the material of chromium-molybdenum steel, and the tempered carbon manganese steel is also ok, but the effect is not as good as chromium-molybdenum steel.
1 、 Mindste ordremængde: Kun 100 stk.
2、Products can be exported to countries or regions:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America
3 、 Brug af cylindre: Vores sømløse stålcylindre bruges i vid udstrækning i industrien, medicinsk udstyr, brandbekæmpelse og videnskabelig forskning
4、 Tensile test of gas cylinders:
A tensile test shall be carried out on material taken from the cylindrical part of the cylinder by adopting either of the following procedures. a) Rectangular specimens shall be prepared in accordance with Figure 7 and with a gauge length Lo = 5,65 So .
The two faces of the test piece representing the inside and the outside surfaces of the cylinder shall not be machined. The elongation, A, shall be not less than the values given in Equation : ma 25 000 2 A R = × (5) with an absolute minimum of 20 %.
5、Machined round specimens shall be prepared having the maximum diameter practicable, the elongation, A, measured on a gauge length of five times the specimens diameter being not less than the value calculated by the formula increased by 2 %, with an absolute minimum of 22 %.
6、50 litre Gas Cylinder Product Parameters table (ISO9809-3 TUV 150BAR)
50L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
Type | Udenfor
Diameter (mm) |
Vand
Kapacitet (L) |
Flaske
Højde (mm) |
Vægt
(kg) |
Arbejde
Tryk (Bar) |
Design væg
tykkelse (mm) |
Materiale
Karakterer |
ISO232-50.0L-150 | 232 | 50.0 | 1450 | 57.5 | 150 | 6.0 | 37MN |