2L ISO9809 0.3M3 150bar 37MN Oxygen Tanks Gas Cylinders

  •  HS
  •  Fremstillet i Kina
  •  15 til 30 dage
  •  Årlig produktion på mere end 800.000 stykker

2 litre 150bar ISO9809 0.3M3 37MN Oxygen tanks gas cylinders
Buy gas cylinders, choose Hongsheng, Hongsheng is willing to be your long-term trusted friend.
Information om produktet:
1, 2 liter; 108 mm cylinder ydre diameter; Iso9809-3 eller GB/T5099.3 produktionsstandarder; Arbejdstryk er 150 bar; Hydrostatisk testtryk er 250 bar; 37 mn manganstål;
2、The height of the cylinder body is 310mm; Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.3m3 (300 l); The minimum design wall thickness of the cylinder is 2.9mm; The cylinder body weight is 3.62Kg;
3、Alias: 2 litre gas cylinders; 0.3 m3 Oxygen tanks. 2 Litre Oxygen cylinders; 2 litre Oxygen tanks; 150bar gas tanks
4、Straightness :The maximum deviation of the cylindrical part of the shell from a straight line shall not exceed 3 mm/m length
5、Verticality and stability :For a cylinder designed to stand on its base, the deviation from the vertical shall not exceed 10 mm/m length and the outer diameter of the surface in contact with the ground is recommended to be greater than 75 % of the nominal outside diameter.
Shandong Hongsheng Pressure Vessel Co, Ltd. er villig til at være din langsigtede partner og chef for cylindersikkerhed og i fællesskab eskortere din cylindersikkerhed.

2 litre ISO9809 0.3M3 150bar 37MN Oxygen Tanks Gas Cylinders

1 、 Mindste ordremængde: Kun 100 stk.

2 、 Brug af cylindre: Vores sømløse stålcylindre bruges i vid udstrækning i industrien, medicinsk udstyr, brandbekæmpelse og videnskabelig forskning

3、We are China’s gas cylinder production factory, product sales:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America

4、”Closing and closing the bottom” refers to the hot spinning forming process in which one end of the cylinder blank is heated to about 1200℃ according to the production process requirements to make it a soft and plastic body. In the process of high speed rotation, one end of the cylinder blank is fused and pressed into the bottom of the cylinder, or it is shaped into the mouth of the cylinder, and finally the blank of the cylinder is formed.

5、EN 473, Non-destructive testing — Qualification and certification of NDT personnel — General principles

6、2litre Gas Cylinder Product Parameters table (ISO9809-3)

Type Udenfor

Diameter

(mm)

Vand

Kapacitet

(L)

Flaske

Højde

(mm)

Vægt

(kg)

Arbejde

Tryk

(Bar)

Design væg

tykkelse

(mm)

Materiale

Karakterer

WMAⅡ89-2.0L-150 89 2.0 419 3.62 150 2.4 37MN
WMAⅡ108-2.0L-150 108 2.0 310 2.07 150 2.9 37MN