1L 150bar CO2 Flaske Argon Nitrogen Helium N2O Luftflasker

  •  HS
  •  Fremstillet i Kina
  •  15 til 30 dage
  •  Årlig produktion på mere end 800.000 stykker

1L 150bar CO2 bottle Argon Nitrogen Helium N2O Air cylinders
Information om produktet:
1、1 litre TUV ; 89mm cylinder outer diameter; Iso9809-3 or GB/T5099.3 production standards; 37 mn manganese steel; Working pressure is 150bar; Hydrostatic test pressure is 250bar;
2、Height of cylinder body: 197mm; Cylinder mouth thread: PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Argon maximum gas storage: 0.12m3 (150L); The minimum design wall thickness of the cylinder is 2.4mm; Cylinder body weight: 1.60kg;
3、Alias: 1L cylinders, 1L bottles, gas, Argon bottles, 150bar cylinders;1 litre gas bottles; 1 litre gas cylinder; 1 litre gas tanks
Tips til sikker brug af gasflasker:
Warm reminder: do not use expired or unstamped gas cylinders.
The gas in the cylinder must not be used up. Oxygen cylinder residual pressure shall not be less than 0.2mpa. The residual pressure of argon cylinder should not be less than 0.5mpa.
The remaining pressure of acetylene cylinder should not be lower than the following: the remaining pressure is 0.1MPa when the ambient temperature is 0℃ to 15℃, 0.2MPa when the ambient temperature is 15℃ to 25℃, and 0.3MPa when the ambient temperature is 25℃ to 40℃.
Shandong Hongsheng Pressure Vessel Co, Ltd. er villig til at være din langsigtede partner og chef for cylindersikkerhed og i fællesskab eskortere din cylindersikkerhed.

1L 150bar CO2 Flaske Argon Nitrogen Helium N2O Luftflasker

1 、 Mindste ordremængde: Kun 100 stk.

2 、 Brug af cylindre: Vores sømløse stålcylindre bruges i vid udstrækning i industrien, medicinsk udstyr, brandbekæmpelse og videnskabelig forskning

3 、 Produkter kan eksporteres til lande eller regioner: Kina, Sydøstasien, Mellemøsten, Asien, Afrika, Europa, Oceanien, Amerika

4 、 Fabrik (vi er producenten) :Shandong Hongsheng Pressure Vessel Co., LTD

5、Gas cylinder flaw detection:Dimensions and shape of notches are of crucial importance for the adjustment of the equipment .

⎯ The length of the notches, E, shall not be greater than 50 mm.

⎯ The width, W, shall be not greater than twice the nominal depth, T. However, where this condition cannot be met a maximum width of 1,0 mm is acceptable.

⎯ The depth of the notches, T, shall be (5 ± 0,75) % of the guaranteed minimum wall thickness, a′, with a minimum of 0,2 mm and a maximum of 1,0 mm over the full length of the notch. Runouts at each end are permissible.

6、The notch shall be sharp edged at its intersection with the surface of the cylinder wall. The cross-section of the notch shall be rectangular except where spark erosion machining methods are employed, when it is acknowledged that the bottom of the notch will be rounded.

⎯ The shape and dimensions of the notch shall be demonstrated by an appropriate method.

7、89mm diameter Gas Cylinder Product Parameters table (ISO9809-3 TUV 150bar)

1L 150bar CO2 Flaske Argon Nitrogen Helium N2O Luftflasker

Type Udenfor

Diameter

(mm)

Vand

Kapacitet

(L)

Flaske

Højde

(mm)

Vægt

(kg)

Arbejde

Tryk

(Bar)

Design væg

tykkelse

(mm)

Materiale

Karakterer

WMⅡ89-1L-150 89 1 240 1.83 150 2.4 37MN
WMAⅡ89-1.2L-150 89 1.2 275 2.07 150 2.4 37MN
WMⅡ89-1.4L-150 89 1.4 310 2.30 150 2.4 37MN
WMⅡ89-2.0L-150 89 2.0 419 3.00 150 2.4 37MN