15L 150bar CO2-flaske Argon Nitrogen Helium luftcylinder

  •  HS
  •  Fremstillet i Kina
  •  15 til 30 dage
  •  Årlig produktion på mere end 800.000 stykker

15L 150bar CO2 bottle Argon Nitrogen Helium N2O Air cylinder
In the use of possible backflow, the use of equipment must be equipped with devices to prevent backflow, such as check valves, check valves, buffer tanks, etc.
15-litre medical oxygen cylinders; 37 mn manganese steel; TUV; Medical oxygen cylinder production standard GB/T5099.3 or ISO9809-3; The outer diameter of oxygen tank is 159mm; The hydrostatic test pressure of oxygen tank is 250bar; Oxygen tank working pressure is 150bar;
When gas cylinders are used in construction sites or other occasions, they should be placed on special vehicles or erected on the flat ground and fixed securely with iron chains to avoid accidents caused by the dumping of gas cylinders on the ground.
The height of the 15-liter cylinder is 932mm; 15 liter gas cylinder weight 16.8KG; The 15-litre cylinder has a maximum capacity of 2.25m3 (2250 litres); Gas cylinder mouth thread PZ27.8; 25E; 3/4-14 NGT, etc.; The minimum design wall thickness of the air bottle is 4.3mm;
Alias:15L gas cylinders, 15L gas bottles, 15L Air gas tanks, TUV Air gas tanks , 150bar CO2 gas bottles;15 litre gas bottles; 15 litre gas cylinder; 15 litre gas tanks

15L 150bar CO2 Flaske Argon Nitrogen Helium N2O Luftcylinder

1 、 Mindste ordremængde: Kun 100 stk.

2 、 Brug af cylindre: Vores sømløse stålcylindre bruges i vid udstrækning i industrien, medicinsk udstyr, brandbekæmpelse og videnskabelig forskning

3 、 Produkter kan eksporteres til lande eller regioner: Kina, Sydøstasien, Mellemøsten, Asien, Afrika, Europa, Oceanien, Amerika

4 、 Fabrik (vi er producenten) :Shandong Hongsheng Pressure Vessel Co., LTD

5、Minimum acceptance values for gas cylinders shall be as shown in the table 5

Impact values for cylinders with maximum tensile strength above 800 MPa shall meet the requirements of ISO 9809-1

6、Tests/examinations on every cylinder :the examinations specified shall be carried out on all cylinders.

7、Following final heat treatment, all cylinders except those selected for testing , shall be subjected to the following tests or examinations:

⎯ an ultrasonic examination as required

⎯ a hydraulic proof pressure test in accordance or a hydraulic volumetric expansion test in accordance .

Test method requirements are given For these test methods and equipment control (calibration and maintenance), see ISO 6406. The purchaser and manufacturer shall agree on which of these alternatives shall be carried out;

⎯ a hardness test in accordance ;

⎯ a leak test in accordance ;

⎯ a water capacity check in accordance .

8、15litre Gas Cylinder Product Parameters table (ISO9809-3 TUV 150BAR)

15L 150bar CO2 Flaske Argon Nitrogen Helium N2O Luftcylinder

Type Udenfor

Diameter

(mm)

Vand

Kapacitet

(L)

Flaske

Højde

(mm)

Vægt

(kg)

Arbejde

Tryk

(Bar)

Design væg

tykkelse

(mm)

Materiale

Karakterer

WMⅡ159-15.0L-150 159 15.0 932 16.8 150 3.9 37MN
WMⅡ180-15.0L-150 180 15.0 792 20.2 150 4.4 37MN