Portable compressed nitrogen cylinder large gas cylinder
Ring flattening test of gas cylinder:
The ring flattening test shall be carried out on one ring of width 25 mm or 4 t, whichever is the greater, taken from the cylinder body. Only the edges of the ring may be machined. The ring shall be flattened between platens until the distance between platens is in accordance with Table 4. The flattened ring shall remain visually uncracked.
1 、 1، الحد الأدنى لكمية الطلب: 100 فقط
2 、 استخدام الأسطوانات: تستخدم أسطواناتنا الفولاذية غير الملحومة على نطاق واسع في الصناعة والأجهزة الطبية ومكافحة الحرائق والبحث العلمي
3、ISO 9809 consists of the following parts, under the general title Gas cylinders
— Refillable seamless steel gas cylinders
— Design, construction and testing:
⎯ Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
⎯ Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
⎯ Part 3: Normalized steel cylinders
4、Impact test of cylinders:
Except for the requirements set out in this subclause, the test shall be carried out in accordance with ISO 148-1.
The impact test pieces shall be taken in the direction as required in Table 5 from the wall of the cylinder. The notch shall be perpendicular to the face of the cylinder wall (see Figure 7).
5、Portable compressed nitrogen cylinder large gas cylinder （ISO9809-3）
| النوع | في الخارج
القطر (مم) |
المياه
القدرة الاستيعابية (L) |
زجاجة
الارتفاع (مم) |
الوزن
（كغ) |
العمل
الضغط （البار） |
تصميم الحائط
السُمك （م) |
المواد
الدرجات |
| WM↪NlⅡ89-1L-150 | 89 | 1 | 240 | 1.83 | 150 | 2.4 | 37MN |
| WM↪NlⅡ89-1.4L-150 | 89 | 1.4 | 310 | 2.30 | 150 | 2.4 | 37MN |
| WM↪Nlⅱ108-2.0L-150 | 108 | 2 | 310 | 3.62 | 150 | 2.9 | 37MN |
| WM↪Nlⅱ108-2.5L-150 | 108 | 2.5 | 374 | 4.29 | 150 | 2.9 | 37MN |
| WMⅱ108-3.0L-150 | 108 | 3.0 | 440 | 4.96 | 150 | 2.9 | 37MN |
| WM↪Nlⅱ108-5.0L-150 | 108 | 5.0 | 696 | 7.74 | 150 | 2.9 | 37MN |
| WMⅱ140-3.4L-150 | 140 | 3.4 | 324 | 5.3 | 150 | 3.8 | 37MN |
| WMⅱ140-4.0L-150 | 140 | 4.0 | 375 | 5.89 | 150 | 3.8 | 37MN |
| WMⅱ140-5.0L-150 | 140 | 5.0 | 447 | 6.96 | 150 | 3.8 | 37MN |
| WMⅱ140-6.3L-150 | 140 | 6.3 | 540 | 7.88 | 150 | 3.8 | 37MN |
| WMⅡ140-6.7-150 | 140 | 6.7 | 569 | 8.30 | 150 | 3.8 | 37MN |
| WMⅱ140-8.0L-150 | 140 | 8.0 | 665 | 9.68 | 150 | 3.8 | 37MN |
| WMⅱ140-9.0L-150 | 140 | 9.0 | 744 | 10.7 | 150 | 3.8 | 37MN |
| WMⅱ140-10.0L-150 | 140 | 10.0 | 818 | 11.9 | 150 | 3.8 | 37MN |
| wmⅱ159-8.0L-150 | 159 | 8.0 | 548 | 9.11 | 150 | 4.3 | 37MN |
| WM↪Nlⅱ159-10.0L-150 | 159 | 10.0 | 660 | 10.9 | 150 | 4.3 | 37MN |
| WMⅱ159-12.0L-150 | 159 | 12.0 | 780 | 13.1 | 150 | 4.3 | 37MN |
| WMⅱ159-13.4L-150 | 159 | 13.4 | 861 | 15.4 | 150 | 4.3 | 37MN |
| WMⅱ159-159-15.0L-150 | 159 | 15.0 | 932 | 16.8 | 150 | 4.3 | 37MN |
| wmⅱ180-20.0L-150 | 180 | 20.0 | 1012 | 24.8 | 150 | 4.9 | 37MN |
| ISO219-40.0L-150 | 219 | 40.0 | 1300 | 48.0 | 150 | 5.7 | 37MN |
| ISO232-40.0L-150 | 232 | 40.0 | 1167 | 43.0 | 150 | 6.0 | 37MN |
| ISO232-46.7L-150 | 232 | 46.7 | 1345 | 48.9 | 150 | 6.0 | 37MN |
| ISO232-47.0L-150 | 232 | 47 | 1351 | 49.0 | 150 | 6.0 | 37MN |
| ISO232-50.0L-150 | 232 | 50.0 | 1450 | 57.7 | 150 | 6.0 | 37MN |
