70L 150bar CO2 Bottles Argon Nitrogen Helium Air Cylinder

  •  النظام المنزلي
  •  صُنع في الصين
  •  من 15 إلى 30 يوماً
  •  إنتاج سنوي يزيد عن 800,000 قطعة سنوياً

70L 150bar CO2 bottles Argon Nitrogen Helium Air cylinder
When it is necessary to lift the cylinder to a high place or to put it back to the ground from a high place, two people must operate at the same time, and the lifting and landing movements are required to be coordinated, the posture is correct, lifting and releasing lightly, it is strictly prohibited to throw and throw when lifting and releasing, and slip and fall when releasing.
70 litres of; 37 mn; 172bar gas cylinderSISO 9809-1 production standard; 267mm cylinder outer diameter; Working pressure 150bar; Hydrostatic test pressure 250bar;
Loading and unloading of gas cylinders should be lightly loaded and unloaded. Throwing, sliding, falling, rolling, bumping and unloading of gas cylinders are strictly prohibited to avoid explosion accidents caused by rough handling.
70 litre cylinder body height 1520mm; The 70 litre bottle weighs 72.4kg; The 70 litre oxygen cylinder has a maximum storage capacity of 10.5m3 (10,500 litres); The minimum design wall thickness for 70 litre cylinders is 6.2mm; 70L cylinder mouth thread PZ27.8; 25E; PZ39; 3/4-14 NGT, etc.; The product can be filled with oxygen, nitrogen, carbon dioxide, air and other gases
Alias: 70L gas Cylinders, 70L gas bottles, 70L Air gas cylinders, 70L Oxygen bottles;The Nitrogen tanks; Fire tanks ,70liter Fire cylinders; 70L nitrogen fire cylinder, Refuge chamber gas bottles;70 litre gas bottles; 70 litres gas cylinder; 70 litre gas tanks

70L 150bar CO2 Bottles Argon Nitrogen Helium Air Cylinder

1 、 1، الحد الأدنى لكمية الطلب: 100 فقط

2 、 استخدام الأسطوانات: تستخدم أسطواناتنا الفولاذية غير الملحومة على نطاق واسع في الصناعة والأجهزة الطبية ومكافحة الحرائق والبحث العلمي

3 、 يمكن تصدير المنتجات إلى البلدان أو المناطق: الصين، جنوب شرق آسيا، الشرق الأوسط، الشرق الأوسط، آسيا، أفريقيا، أوروبا، أوقيانوسيا، أمريكا

4 、 المصنع (نحن الشركة المصنعة) : شركة شاندونغ هونغشنغ لأوعية الضغط، المحدودة

5、 Type approval certificate of gas tanks: If the results of the prototype tests and checks according  are satisfactory, the inspector shall issue a type approval certificate. Annex C provides a typical example of a suitable form of type approval certificate.

6、Batch tests of gas bottles:

All tests for checking the quality of the gas cylinder material shall be carried out on material from finished cylinders. For the purposes of batch testing, the manufacturer shall provide the inspector with:

⎯ the type approval certificate;

⎯ the certificates stating the cast analyses of the steel supplied for the manufacture of the cylinders;

⎯ evidence that appropriate heat treatment has been performed;

⎯ the certificates showing the ultrasonic examination results, where applicable;

⎯ a list of the cylinders, stating serial numbers and stamp markings, as required;

⎯ confirmation that threads are checked in accordance with gauging requirements. The gauges to be used shall be specified

7、70 litre Gas Cylinder Product Parameters table (ISO9809-3 TUV 150BAR)

70L 150bar CO2 Bottles Argon Nitrogen Helium Air Cylinder

النوع في الخارج

القطر

(مم)

المياه

القدرة الاستيعابية

(L)

زجاجة

الارتفاع

(مم)

الوزن

(كغ)

العمل

الضغط

(البار)

تصميم الحائط

السُمك

(م)

المواد

الدرجات

ISO267-70.0L-150 267 70.0 1520 72.4 150 6.2 37MN