6L ISO9809-1 TPED 200bar34CrMo4 Oxygen Tanks Gas Cylinders

6L ISO9809-1 TPED 200bar34CrMo4 Oxygen Tanks Gas Cylinders

1 、 1، الحد الأدنى لكمية الطلب: 100 فقط

2 、 استخدام الأسطوانات: تستخدم أسطواناتنا الفولاذية غير الملحومة على نطاق واسع في الصناعة والأجهزة الطبية ومكافحة الحرائق والبحث العلمي

3 、 نحن مصنع إنتاج أسطوانات الغاز في الصين، مبيعات المنتجات: الصين، جنوب شرق آسيا، الشرق الأوسط، الشرق الأوسط، آسيا، أفريقيا، أوروبا، أوقيانوسيا، أمريكا

4、Gas cylinders Neck design : The external diameter and thickness of the formed neck end of the cylinder shall be adequate for the torque applied in fitting the valve to the cylinder. The torque may vary according to the diameter of thread, the form of thread and the sealant used in the fitting of the valve.

5、In establishing the minimum thickness, consideration shall be given to obtaining a thickness of wall in the cylinder neck which will prevent permanent expansion of the neck during the initial and subsequent fittings of the valve into the cylinder without support of an attachment.

The external diameter and thickness of the formed neck end of the cylinder shall not be damaged (no permanent expansion or crack) by the application of the maximum torque required to fit the valve to the cylinder (see ISO 13341) and the stresses when the cylinder is subjected to its test pressure.

6、In specific cases (e.g. very thin walled cylinders), where these stresses cannot be supported by the neck itself, the neck may be designed to require reinforcement, such as a neck ring or shrunk on collar, provided the reinforcement material and dimensions are clearly specified by the manufacturer and this configuration is part of the type approval procedure.

7、6 litre Gas Cylinder Product Parameters table (ISO9809-1 200bar)

6L ISO9809-1 TPED 200bar 34CrMo4 Oxygen Tanks Gas Cylinders

نصائح للاستخدام الآمن لأسطوانات الغاز:

The cylinder body and valve of oxygen or other strong oxidizing gases should not be contaminated with grease or other combustible materials. The working clothes, gloves, loading and unloading tools and tools of the user should not be stained with grease.

When installing the reducing valve or busbar, check that the threads of the clamp or connecting nut are intact. Depressors, connectors, conduits and pressure gauges used to connect cylinders shall be marked and used on a particular type of cylinder

إن شركة Shandong Hongsheng لأوعية الضغط المحدودة على استعداد لأن تكون شريكك على المدى الطويل وكبير مسؤولي سلامة الأسطوانات، وأن ترافق سلامة الأسطوانة الخاصة بك بشكل مشترك.