40L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder
Thread profile of cylinders:
The thread profile is a British Standard Whitworth (BSW)1) form with a 55° angle.
The form and thread height measurements are perpendicular to the cone surface .
It is crucial that the thread profile is cut in this way and not perpendicular to the axis of the cone.
1 、 1، الحد الأدنى لكمية الطلب: 100 فقط
2 、 استخدام الأسطوانات: تستخدم أسطواناتنا الفولاذية غير الملحومة على نطاق واسع في الصناعة والأجهزة الطبية ومكافحة الحرائق والبحث العلمي
3 、 يمكن تصدير المنتجات إلى البلدان أو المناطق: الصين، جنوب شرق آسيا، الشرق الأوسط، الشرق الأوسط، آسيا، أفريقيا، أوروبا، أوقيانوسيا، أمريكا
4 、 المصنع (نحن الشركة المصنعة) : شركة شاندونغ هونغشنغ لأوعية الضغط، المحدودة
5 、 اختبار هيدروليكي لقوارير الغاز:
Proof pressure test The water pressure in the cylinder shall be increased at a controlled rate until the test pressure, ph, is reached within a measuring tolerance of 0/+3 % or +10 bar, whichever is the lower.
يجب أن تظل الاسطوانة تحت الضغط، ph، لمدة 30 ثانية على الأقل للتأكد من عدم انخفاض الضغط وعدم وجود تسرب.
During the period that the cylinder is under test pressure, it shall be visible (including the base) and remain dry.
After the test, the cylinder shall show no visible permanent deformation and no trace of moisture implying leakage.
6、40 litre Gas Cylinder Product Parameters table (ISO9809-1 TPED 200bar)
40L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder
النوع | في الخارج
القطر (مم) |
المياه
القدرة الاستيعابية (L) |
زجاجة
الارتفاع (مم) |
الوزن
(كغ) |
العمل
الضغط (البار) |
تصميم الحائط
السُمك (م) |
المواد
الدرجات |
ISO232-40.0L-200 | 232 | 40.0 | 1156 | 45.7 | 200 | 6.0 | 34CrMo4 |