3L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinders

  •  النظام المنزلي
  •  صُنع في الصين
  •  من 15 إلى 30 يوماً
  •  إنتاج سنوي يزيد عن 800,000 قطعة سنوياً

3L 150bar CO2 bottle Argon Nitrogen Helium N2O Air cylinders
معلومات المنتج:
1、3 litres; 108mm cylinder outer diameter; Working pressure is 150bar; Hydrostatic test pressure is 250bar; Iso9809-3 or GB/T5099.3 production standards; 37 mn manganese steel;
2、Height of cylinder body: 440mm; Cylinder mouth thread: PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum reservoir is 0.45m3 (450 L); Minimum design wall thickness of cylinder: 2.9mm; The cylinder body weight is 4.96Kg;
3、Alias: 3L gas cylinders, 3L gas bottles, Helium bottles, TUV gas bottles, 150bar Air cylinders;3 litre gas bottles; 3litre gas cylinder; 3 litre gas tanks
نصائح للاستخدام الآمن لأسطوانات الغاز:
Do not use dangerous means such as rope pulling to transport cylinders to high places, and do not use stairs or ramps to transport cylinders down freely.
Gas cylinder accessories, such as safety helmet, shock-proof ring, pressure gauge, pressure reducing valve, etc., should be fully qualified.
Combustible gas cylinders such as dissolved acetylene cylinders should also be equipped with anti-return firearms suitable for the type of gas. Different types of anti-return firearms should not be mixed
إن شركة Shandong Hongsheng لأوعية الضغط المحدودة على استعداد لأن تكون شريكك على المدى الطويل وكبير مسؤولي سلامة الأسطوانات، وأن ترافق سلامة الأسطوانة الخاصة بك بشكل مشترك.

3L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinders

1 、 1، الحد الأدنى لكمية الطلب: 100 فقط

2 、 استخدام الأسطوانات: تستخدم أسطواناتنا الفولاذية غير الملحومة على نطاق واسع في الصناعة والأجهزة الطبية ومكافحة الحرائق والبحث العلمي

3 、 يمكن تصدير المنتجات إلى البلدان أو المناطق: الصين، جنوب شرق آسيا، الشرق الأوسط، الشرق الأوسط، آسيا، أفريقيا، أوروبا، أوقيانوسيا، أمريكا

4 、 المصنع (نحن الشركة المصنعة) : شركة شاندونغ هونغشنغ لأوعية الضغط، المحدودة

5、Flaw detection of the cylindrical parts:

The cylinder wall shall be examined for longitudinal imperfections with the ultrasonic energy transmitted in both circumferential directions and for transverse imperfections in both longitudinal directions.

For concave-based cylinders where hydrogen embrittlement or stress corrosion can occur (see ISO 11114-1), the transition region between the cylindrical part and the cylinder base shall also be examined for transverse imperfections in the direction of the base.

6、Gas cylinder flaw detection shall be performed by one of the following two methods.

⎯ Method A: The ultrasonic sensitivity shall be set at + 6 dB in order to improve the detection of imperfections equivalent to 5 % of the cylindrical wall thickness in this thickened portion.

⎯ Method B: The ultrasonic system shall be calibrated using a standard reference artefact of a cylinder with a notch at sidewall-to-base transition (SBT) area shown in Figure B.2.

⎯ The depth of notch, T, for SBT shall be (10 ± 1) % of the guaranteed minimum wall thickness, a′, with a minimum of 0,2 mm and maximum of 1 mm, over the full length of the notch.

7、108mm diameter 3litre Gas Cylinder Product Parameters table (ISO9809-3 TUV  150BAR)

3L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinders

النوع في الخارج

القطر

(مم)

المياه

القدرة الاستيعابية

(L)

زجاجة

الارتفاع

(مم)

الوزن

(كغ)

العمل

الضغط

(البار)

تصميم الحائط

السُمك

(م)

المواد

الدرجات

WMⅡ108-3L-150 108 3.0 440 4.96 150 2.9 37MN