2L ISO9809 0.3M3 150bar 37MN Oxygen Tanks Gas Cylinders

  •  النظام المنزلي
  •  صُنع في الصين
  •  من 15 إلى 30 يوماً
  •  إنتاج سنوي يزيد عن 800,000 قطعة سنوياً

2 litre 150bar ISO9809 0.3M3 37MN Oxygen tanks gas cylinders
Buy gas cylinders, choose Hongsheng, Hongsheng is willing to be your long-term trusted friend.
معلومات المنتج:
1 、2 لتر؛ القطر الخارجي للأسطوانة 108 مم؛ معايير الإنتاج Iso9809-3 أو GB/T5099.3؛ ضغط العمل 150 بار؛ ضغط الاختبار الهيدروستاتيكي 250 بار؛ 37 مليون منجنيز فولاذ منجنيز;
2、The height of the cylinder body is 310mm; Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.3m3 (300 l); The minimum design wall thickness of the cylinder is 2.9mm; The cylinder body weight is 3.62Kg;
3、Alias: 2 litre gas cylinders; 0.3 m3 Oxygen tanks. 2 Litre Oxygen cylinders; 2 litre Oxygen tanks; 150bar gas tanks
4、Straightness :The maximum deviation of the cylindrical part of the shell from a straight line shall not exceed 3 mm/m length
5、Verticality and stability :For a cylinder designed to stand on its base, the deviation from the vertical shall not exceed 10 mm/m length and the outer diameter of the surface in contact with the ground is recommended to be greater than 75 % of the nominal outside diameter.
إن شركة Shandong Hongsheng لأوعية الضغط المحدودة على استعداد لأن تكون شريكك على المدى الطويل وكبير مسؤولي سلامة الأسطوانات، وأن ترافق سلامة الأسطوانة الخاصة بك بشكل مشترك.

2 litre ISO9809 0.3M3 150bar 37MN Oxygen Tanks Gas Cylinders

1 、 1، الحد الأدنى لكمية الطلب: 100 فقط

2 、 استخدام الأسطوانات: تستخدم أسطواناتنا الفولاذية غير الملحومة على نطاق واسع في الصناعة والأجهزة الطبية ومكافحة الحرائق والبحث العلمي

3 、 نحن مصنع إنتاج أسطوانات الغاز في الصين، مبيعات المنتجات: الصين، جنوب شرق آسيا، الشرق الأوسط، الشرق الأوسط، آسيا، أفريقيا، أوروبا، أوقيانوسيا، أمريكا

4、”Closing and closing the bottom” refers to the hot spinning forming process in which one end of the cylinder blank is heated to about 1200℃ according to the production process requirements to make it a soft and plastic body. In the process of high speed rotation, one end of the cylinder blank is fused and pressed into the bottom of the cylinder, or it is shaped into the mouth of the cylinder, and finally the blank of the cylinder is formed.

5、EN 473, Non-destructive testing — Qualification and certification of NDT personnel — General principles

6、2litre Gas Cylinder Product Parameters table (ISO9809-3)

النوع في الخارج

القطر

(مم)

المياه

القدرة الاستيعابية

(L)

زجاجة

الارتفاع

(مم)

الوزن

(كغ)

العمل

الضغط

(البار)

تصميم الحائط

السُمك

(م)

المواد

الدرجات

WMA↪NL_2171↩89-2.0L-150 89 2.0 419 3.62 150 2.4 37MN
WMAⅱ108-2.0L-150 108 2.0 310 2.07 150 2.9 37MN