15L 200bar Seamless Steel Oxygen Argon Helium CO2 Nitrogen Gas Cylinder

  •  النظام المنزلي
  •  صُنع في الصين
  •  من 15 إلى 30 يوماً
  •  إنتاج سنوي يزيد عن 800,000 قطعة سنوياً

15L 200bar ISO9809-1 CO2 cylinder Argon nitrogen helium N2O cylinder
Gas cylinders should be inspected before entering the site and used. They should be purchased from manufacturers with gas cylinder production or filling licenses, or filled with gas cylinders. Inspection and acceptance shall be carried out before entering the site, and unqualified ones shall not be used in the site.
15 litres; 34CrMo4 alloy steel; Iso9809-1 production standard; TPED 159mm or 165mm cylinder outer diameter; Working pressure 200bar; Hydraulic test pressure 300bar;
The steel seal of cylinder body must be clearly visible. If there are unidentifiable cylinders, they should not be used in the field
The height of the 15-litre argon gas bottle is 932mm; Air bottle weight 16.8KG or 17.2KG; The 15 litre air cylinder has a maximum storage capacity of 3m3 (3000 litres); Oxygen cylinder mouth thread PZ27.8; 25E; 3/4-14 NGT, etc.; The minimum design wall thickness of oxygen cylinder is 3.5-3.6mm;
Gas cylinder valve should not be stained with oil, if there is oil must be cleaned up, otherwise not allowed to enter the market;
Alias: 15L 200bar gas cylinders; 15L 200bar gas tanks,15L 200bar Air gas cylinders,TPED Air gas cylinders,200bar CO2 gas tanks; 15 litre 200bar gas cylinders; 15litre 200bar gas bottles; 15 litre 200bar gas tanks;

15L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder

1 、 1، الحد الأدنى لكمية الطلب: 100 فقط

2 、 استخدام الأسطوانات: تستخدم أسطواناتنا الفولاذية غير الملحومة على نطاق واسع في الصناعة والأجهزة الطبية ومكافحة الحرائق والبحث العلمي

3 、 يمكن تصدير المنتجات إلى البلدان أو المناطق: الصين، جنوب شرق آسيا، الشرق الأوسط، الشرق الأوسط، آسيا، أفريقيا، أوروبا، أوقيانوسيا، أمريكا

4 、 المصنع (نحن الشركة المصنعة) : شركة شاندونغ هونغشنغ لأوعية الضغط، المحدودة

5、Hardness test  of gas bottles:

A hardness test in accordance with ISO 6506-1 (Brinell), ISO 6508-1 (Rockwell) or other equivalent methods, shall be carried out by the manufacturer.

The hardness values thus determined shall be within the limits specified by the cylinder manufacturer for the material, dependent upon the heat treatment used for the production of the cylinder and the intended gas service (e.g. embrittling gases).

NOTE Methods for measuring the surface indentations other than given in ISO 6506-1 or ISO 6508-1 can be used subject to agreement between the parties concerned, provided that an equal level of accuracy can be demonstrated.

6、15litre Gas Cylinder Product Parameters table (ISO9809-1 TPED 200BAR)

15L 200bar CO2 Argon Tanks Nitrogen Helium N2O Air Cylinder

النوع في الخارج

القطر

(مم)

المياه

القدرة الاستيعابية

(L)

زجاجة

الارتفاع

(مم)

الوزن

(كغ)

العمل

الضغط

(البار)

تصميم الحائط

السُمك

(م)

المواد

الدرجات

WGⅡ159-15.0L-200 159 15.0 932 16.8 200 3.5 34CrMo4
WGⅡ165-15.0L-200 165 15.0 880 17.2 200 3.6 34CrMo4
WGⅡ180-15.0L-200 180 15.0 792 20.2 200 3.9 34CrMo4