زجاجة هواء الأرغون الصغيرة المحمولة الكبيرة اسطوانة ثاني أكسيد الكربون الأرجون الكبيرة

  •  النظام المنزلي
  •  صُنع في الصين
  •  من 15 إلى 30 يوماً
  •  إنتاج سنوي يزيد عن 800,000 قطعة سنوياً

Small portable hybrid argon gas cylinder Large CO2 argon gas cylinder
الخدمة، هو موقف، ولكن أيضًا اطمئن.
ضمان الخدمة الدقيقة فقط هي التي يمكن أن تخلق جودة جيدة.
Summer to have shading facilities to prevent exposure to the sun, hot areas should avoid daytime transport.
In addition to the driver, escort personnel, is strictly prohibited from taking.
يُمنع الركاب والطاقم منعاً باتاً من التدخين أو حمل النار.
No fireworks on board. When transporting flammable and toxic gas cylinders, fire extinguishing equipment or gas protection equipment should be equipped on the vehicle.
1, mixture cylinder parameters: 89mm-267mm outer diameter; 0.8 litre to 80 litre mixture cylinders; Argon co2 mixing gas cylinder working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material; Iso9809-3 production standard;
2. Height of mixed gas cylinder: 197mm-1520mm; Cylinder body weight: 1.60kg-72.4kg; Minimum design wall thickness of gas cylinders: 2.4mm-6.2mm; Cylinder mouth thread: PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage capacity of mixed cylinders is 0.12m3-12m3 (150L-12000L)
3、Alias: Mix gas cylinder, 150bar Argon cylinder, Argon C02 bottle, Air gas Argon cylinder, Argon Mix bottle
إن شركة Shandong Hongsheng لأوعية الضغط المحدودة على استعداد لأن تكون شريكك على المدى الطويل وكبير مسؤولي سلامة الأسطوانات، وأن ترافق سلامة الأسطوانة الخاصة بك بشكل مشترك.

Small portable hybrid argon gas cylinder Large CO2 argon gas cylinder

length of internal thread, L2 length of full form thread in the cylinder neck, measured along the cone axis

pitch P distance, measured parallel to the cone surface, between two homologous points of two parallel consecutive flanks of the same thread

1 、 تستخدم أسطواناتنا الفولاذية غير الملحومة على نطاق واسع في الصناعة والأجهزة الطبية ومكافحة الحرائق والبحث العلمي

2 、 الحد الأدنى لكمية الطلب: 100 فقط

3、Taper ratio of the difference of two diameters corresponding to planes normal to the axis of the reference cone, and the axial distance between the same planes

نحن مصنع إنتاج أسطوانات الغاز في الصين,

4、Bend test and flattening test of cylinders:

The bend test shall be carried out in accordance with ISO 7438 on two test pieces obtained by cutting either one or two rings of width 25 mm or 4 t, whichever is the greater, into equal parts. Each test piece shall be of sufficient length to permit the bend test to be carried out correctly. Only the edges of each strip may be machined.

5、The test piece shall not crack when bent inwards around the former until the inside surfaces are not further apart than the diameter of the former (see Figure 6).

6、Seamless steel cylinders, whose body material is specified, must be made of killed steel smelted in alkaline open hearth, electric hearth or oxygen blowing alkaline Bessemer.

7、(ISO9809-3 TUV 150BAR)Small portable hybrid argon gas cylinder Large CO2 argon gas cylinder

النوعفي الخارج

القطر

(مم)

المياه

القدرة الاستيعابية

(L)

زجاجة

الارتفاع

(مم)

الوزن

(كغ)

العمل

الضغط

(البار)

تصميم الحائط

السُمك

(م)

المواد

الدرجات

WM↪NlⅡ89-1L-1508912401.831502.437MN
WM↪NlⅡ89-1.4L-150891.43102.301502.4
WM↪Nlⅱ108-2.0L-15010823103.621502.9
WM↪Nlⅱ108-2.5L-1501082.53744.291502.9
WMⅱ108-3.0L-1501083.04404.961502.9
WM↪Nlⅱ108-5.0L-1501085.06967.741502.9
WMⅱ140-3.4L-1501403.43245.31503.8
WMⅱ140-4.0L-1501404.03755.891503.8
WMⅱ140-5.0L-1501405.04476.961503.8
WMⅱ140-6.3L-1501406.35407.881503.8
WMⅡ140-6.7-1501406.75698.301503.8
WMⅱ140-8.0L-1501408.06659.681503.8
WMⅱ140-9.0L-1501409.074410.71503.8
WMⅱ140-10.0L-15014010.081811.91503.8
wmⅱ159-8.0L-1501598.05489.111504.3
WM↪Nlⅱ159-10.0L-15015910.066010.91504.3
WMⅱ159-12.0L-15015912.078013.11504.3
WMⅱ159-13.4L-15015913.486115.41504.3
WMⅱ159-159-15.0L-15015915.093216.81504.3
wmⅱ180-20.0L-15018020.0101224.81504.9
ISO219-40.0L-15021940.0130048.01505.7
ISO232-40.0L-15023240.0116743.01506.0
ISO232-46.7L-15023246.7134548.91506.0
ISO232-47.0L-15023247135149.01506.0
ISO232-50.0L-15023250.0145057.71506.0