UK Market Certificate Rho 200bar 2L 3.4L 5L CO2 Bottle Argon Nitrogen Helium Air Cylinder seamless gas cylinders

  •  النظام المنزلي
  •  صُنع في الصين
  •  من 15 إلى 30 يوماً
  •  إنتاج سنوي يزيد عن 800,000 قطعة سنوياً

Rho 200bar CO2 bottle Argon Nitrogen Helium Air cylinder
نصائح للاستخدام الآمن لأسطوانات الغاز:
It is strictly forbidden to mix gas cylinders with inflammable and explosive objects.
When using gas cylinders, be careful not to contact with charged objects, and keep the cylinder valve away from grease.
Warm reminder: the cylinder cap should be tightened before handling. Gas cylinders should be loaded and unloaded lightly. Throwing, rolling and collision are strictly prohibited. Gas cylinders should be moved using handcarts, boards, etc.
معلومات المنتج:
1、Cylinder parameters: 89mm-267mm outer diameter; 0.8 litres to 80 liters; Working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material; Iso9809-3 production standard;
2、Height of cylinder body: 197mm-1520mm; Cylinder body weight: 1.60kg-72.4kg; Minimum design wall thickness of gas cylinders: 2.4mm-6.2mm; Cylinder mouth thread: PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.12m3-12m3 (150L-12000L)
3、Alias: CO2 gas cylinders, Argon cylinders, Nitrogen cylinders, Helium cylinders, N2O cylinders
إن شركة Shandong Hongsheng لأوعية الضغط المحدودة على استعداد لأن تكون شريكك على المدى الطويل وكبير مسؤولي سلامة الأسطوانات، وأن ترافق سلامة الأسطوانة الخاصة بك بشكل مشترك.

Rho 200bar CO2 Bottle Argon Nitrogen Helium Air Cylinder

Cylinders with indications which are equal to or greater than the lowest of the indications from the reference notches shall be withdrawn.

This comparison shall be made between the indications from the cylinder and those from the reference notch in the same orientation and on the same face, e.g. a transverse inside imperfection shall be compared with the transverse inside reference notch.

The cause of the indication shall be identified and, if possible, removed; after removal the cylinders shall be re-subjected to ultrasonic flaw detection and thickness measurement.

1、Made in China: Products can be exported to countries or regions:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America

Minimum order quantity: 100 only

2 、 استخدام الأسطوانات: تستخدم أسطواناتنا الفولاذية غير الملحومة على نطاق واسع في الصناعة والأجهزة الطبية ومكافحة الحرائق والبحث العلمي

3、Mechanical properties test :(1) pull 1 (longitudinal);  (2) Three shocks (D>140 horizontally, D≤140 longitudinally);  (3) Cold bending 2 (ring), or 1 or 1 ring flattening

4、Occasionally, a below minimum wall thickness indication could result due to the presence of a sub-surface imperfection (e.g. internal lamination) at the point. In such cases the extent of the imperfection shall be evaluated. Any cylinder which is shown to be below the guaranteed minimum wall thickness shall be rejected.

5、Chinese market: Relying on the growth of national economy and industry, industry growth potential is greater

Market overview: China’s industrial gas market is growing faster than the world’s, and per capita gas consumption has exceeded the global average level.  However, there is still a big gap compared with developed countries in Europe and the United States: in 2021, per capita gas consumption will be 36% of the United States, 42% of Western Europe, and 42% of Australia.  China’s industrial gas market is nearly 200 billion yuan, and the compound growth rate of China’s gas market from 2017 to 2021 is about 11%.  The long-term compound growth rate of industrial gas is faster than GDP growth rate: from 2011 to 2021, the annual compound growth rate of industrial gas in China is about 1.2 times of GDP and 1.7 times of industrial added value;  Overseas experience: The compound annual growth rate of industrial gas industry is about 1.5 times of GDP.

6、TUV 150bar CO2 Bottle Argon Nitrogen Helium  Air Cylinder(ISO9809-3 150BAR)

النوع في الخارج

القطر

(مم)

المياه

القدرة الاستيعابية

(L)

زجاجة

الارتفاع

(مم)

الوزن

(كغ)

العمل

الضغط

(البار)

تصميم الحائط

السُمك

(م)

المواد

الدرجات

WM↪NlⅡ89-1L-150 89 1 240 1.83 150 2.4 37MN
WM↪NlⅡ89-1.4L-150 89 1.4 310 2.30 150 2.4
WM↪Nlⅱ108-2.0L-150 108 2 310 3.62 150 2.9
WMⅡ108-2.5L-150 108 2.5 374 4.29 150 2.9
WMⅡ108-3.0L-150 108 3.0 440 4.96 150 2.9
WM↪Nlⅱ108-5.0L-150 108 5.0 696 7.74 150 2.9
WMⅱ140-3.4L-150 140 3.4 324 5.3 150 3.8
WMⅱ140-4.0L-150 140 4.0 375 5.89 150 3.8
WMⅱ140-5.0L-150 140 5.0 447 6.96 150 3.8
WMⅱ140-6.3L-150 140 6.3 540 7.88 150 3.8
WMⅡ140-6.7-150 140 6.7 569 8.30 150 3.8
WMⅱ140-8.0L-150 140 8.0 665 9.68 150 3.8
WMⅱ140-9.0L-150 140 9.0 744 10.7 150 3.8
WMⅱ140-10.0L-150 140 10.0 818 11.9 150 3.8
wmⅱ159-8.0L-150 159 8.0 548 9.11 150 4.3
WM↪Nlⅱ159-10.0L-150 159 10.0 660 10.9 150 4.3
WMⅱ159-12.0L-150 159 12.0 780 13.1 150 4.3
WMⅱ159-13.4L-150 159 13.4 861 15.4 150 4.3
WMⅱ159-159-15.0L-150 159 15.0 932 16.8 150 4.3
wmⅱ180-20.0L-150 180 20.0 1012 24.8 150 4.9
ISO219-40.0L-150 219 40.0 1300 48.0 150 5.7
ISO232-40.0L-150 232 40.0 1167 43.0 150 6.0
ISO232-46.7L-150 232 46.7 1345 48.9 150 6.0
ISO232-47.0L-150 232 47 1351 49.0 150 6.0
ISO232-50.0L-150 232 50.0 1450 57.7 150 6.0